Know your load charts before assessment day.
Load charts, slinging and rigging, signals and hazard management, aligned to the NZ Certificate in Cranes.
Try free → Pay $14.99 → Instant access
- No account needed
- An explanation on every question
- 30 days full access
About Crane Operator
Crane work in New Zealand is structured around the New Zealand Certificate in Cranes: Level 3 carries strands including Dogman, and holding it with the Dogman strand is the prerequisite for the Level 4 qualification and its machine-specific strands. WorkSafe's Approved Code of Practice for Cranes sets out the qualifications industry expects for each machine type. Asessly practises the theory underneath: reading load charts by radius, sling angles and leg tension, signals and communication discipline, and exclusion zones.
Aligned to: NZ Certificate in Cranes
- 5 sections
- Dogman & Rigging
What the full product covers
- Load charts and lift planning
- Slinging, rigging and lifting gear
- Signals and communication
- Hazard management and exclusion zones
- Legislation, ACOP and qualifications
Question bank
The sample questions are live. The full bank of 100 is being written and reviewed, and this product goes on sale when it is published, not before.
Where our information comes from
- WorkSafe New Zealand: Cranes · checked 2026-08-22
- NZQA: New Zealand Certificate in Cranes (Level 3) · checked 2026-08-22
- WorkSafe New Zealand: Approved Code of Practice for Cranes · checked 2026-08-23
Common questions
About Crane Operator and how Asessly prepares you for it.
Questions about Asessly itselfWhat does crane operator certification involve in New Zealand?
The New Zealand Certificate in Cranes is the recognised qualification pathway, sitting alongside the health and safety duties that apply to high-risk work under the Health and Safety at Work Act 2015.
What does Asessly cover?
The theory behind safe crane work: load charts and capacity, slinging and rigging principles, ground conditions and stability, exclusion zones, communication and signals, and the duties that sit behind high-risk work.
Does Asessly award a crane qualification?
No. We are not affiliated with WorkSafe New Zealand or any crane training provider, and Asessly practice does not award unit standards or a qualification.
Why does load chart work catch people out?
Because the answer depends on several variables at once: radius, configuration, ground conditions and rigging weight. Reading one number off a chart without accounting for the rest is the classic error.
Do I legally need a unit standard to operate a crane?
Not strictly. The Approved Code of Practice for Cranes says anyone operating or working with a crane should hold the applicable unit standards as a minimum and preferably the relevant National Certificate in Crane Operation, but a unit standard is one way of demonstrating competence rather than a legal requirement in itself. The duty sits with the crane's controller — its owner, lessee, sublessee or bailee — who has to be satisfied operators are competent through a combination of training, qualification and experience.
Are these real assessment questions?
No. They are original Asessly questions written from publicly available standards and guidance.
Start with free questions
The real interface, the real explanations, and a score at the end.